ÍøÕ¾Ê×Ò³ Õ¾µãµØͼ ¼ÓÈëÊÕ²Ø

• ¹«Ë¾ÐÂÎÅ
• ÐÐÒµ¶¯Ì¬
• ÍøÕ¾¹«¸æ

Three types of parse seamer

Semi-active seamer

 

Semi-active seamer individual lever seamer, pneumatic seamer, electric seamer. Individual utility in the production of small businesses, the single-piece production and small batch production plant.

 

a lever seamer:

 

Lever seamer is currently the most widely used semi-active seamer, solid mechanical quality, easy debugging and other strengths, by the broad small factories, small workshops, stalls, shops and other units use.

 

The models cover the simple, take twice fold pressure seal first knife hem knife second knife for bending the fastening knife. Individual jar used for non-vacuum inflatable seal.

 

[Semi-active seamer]

 

Semi-active seamer

 

 

1 with a lid the jar put what care on.

 

With the foot pedal jar top tight upper die.

 

Lever handle to make the first cut, the second knife moving rapidly volumes cover edge fastening.

 

Put down the foot, finished output.

 

b, pneumatic seamer:

 

The models than lever the seamer active level slightly higher. The application of two cylinders alternative to artificial pull the arm and foot.

 

 

[Pneumatic seamer]

 

Pneumatic seamer

 

1 with a lid the jar put what care on.

 

2 pedal foot switch, pallet cylinder jar top tight on the die.

 

3. Cylinder swing arm swing, the first knife, knife moving rapidly roll cover side fastening.

 

4. Finished output.

 

c, electric seamer:

 

Electric seamer LEVER kind difference is that the first blade and second blade are mounted to both sides of the stamper.

 

 

Electric seamer]

 

Electric seamer

 

1 with a lid the jar put what care on.

 

Pedal foot switch may jar sensor switch (the manufacturers, practices vary), bottom bracket cam by motor driven by the bottom bracket to the top of the jar tightly on a die.

 

3 because the side of the swing arm the role of the cam, so that the first knife pressing lid bead, second blade swing arm when the cam is rotated one-half weeks after the beginning of pressing.

 

4. Finished output.

 

The prevalence of the semi-active seamer above models for domestic models, models of the average seamer speed in between 15 to 30 cans / min. Because of lower capital and skills content is not high, the quality is solid, so many individuals and units to take such models. The defect is not practical in high-volume production line automation.

ÏÂһƪ ¡ý Fruit and vegetable canning operation points
ÉÏһƪ ¡ü Cans electric seamer structural principle and method of operation